
The Graco Fusion PC (25T481) spray foam gun pairs a wide round pattern with a replaceable ProConnect fluid cartridge. It comes with a 2222 mix chamber and a four-hose manifold. For busy crews, these features deserve a closer look before the next gun purchase.
What Sets This Spray Foam Gun Apart?
The Graco Fusion PC (25T481) builds on Graco’s Fusion Air Purge platform. However, its ProConnect design changes how crews service the fluid section. A single cartridge replaces 13 individual parts.
As a result, crews can replace the cartridge instead of rebuilding those parts one by one. This can help reduce downtime when the fluid section needs service.
- Wide round pattern: Supplied with the 2222 wide-pattern mix chamber.
- Four-hose manifold: Supports a compatible recirculating hose setup.
- ProConnect cartridge: Simplifies fluid-section replacement.
- Integrated check valves: Help contain material crossover.
Does a Wide Pattern Mean Higher Output?
A wide pattern describes how material spreads across the surface. Flow rate describes how much material passes through the gun. Therefore, a wide pattern alone does not prove that a gun will deliver more pounds per minute.
For high-output jobs, match the spray foam gun and chamber to the whole rig. The proportioner, heaters, transfer pumps, and hoses must support the required flow.
Also, avoid choosing this model based on job size alone. A large project may call for a different chamber to meet the crew’s production goals.
Which Jobs and Crews Should Consider It?
Crews with a compatible four-hose recirculating system may find this model worth reviewing. In particular, contractors who want simpler fluid-section service may value the cartridge design.
The Fusion PC platform serves spray foam and polyurea applications. When reviewing the Graco Fusion PC (25T481), discuss these job needs with SFS:
- Spray foam insulation: For wall, attic, or other insulation work, review the foam type, required lift thickness, and space available for each pass.
- Polyurea protective coatings: Review the coating material, surface shape, required film thickness, and desired finish before choosing a chamber.
- Repeat production work: Crews with long spray runs should compare required material flow with the capacity of the complete rig.
However, platform compatibility does not mean the supplied 2222 chamber fits every application. Confirm the material’s pressure and temperature needs, then select the chamber and pattern for the task.
Check Chamber Selection Before You Buy
First, share your material, rig model, and daily production goals with SFS. Then, review the supplied 2222 chamber against the flow and finish your work requires.
Next, confirm hose and manifold compatibility. A four-hose setup needs the proper supply and return arrangement; check those connections before ordering.
Plan for Service as Well as Production
A replacement cartridge can help crews get back to work sooner. Still, the spray foam gun needs the cleaning, lubrication, and inspection steps listed in Graco’s manual.
Before you buy, ask about spare cartridges, chamber options, current pricing, and availability. That way, your purchase supports both daily spray work and future service needs.
Contact Spray Foam Systems to review the Graco Fusion PC (25T481) spray foam gun and find the right configuration for your rig and material.
FAQs
1. What mix chamber comes with the Graco Fusion PC (25T481)?
It comes with a wide 2222 mix chamber. Graco identifies this chamber as PC22WD.
2. Is the Graco Fusion PC (25T481) automatically the best choice for high-output jobs?
No. Pattern width alone does not establish output. Match the chamber and gun configuration to your material, rig capacity, and production needs.
3. Does the ProConnect cartridge replace routine gun maintenance?
No. It simplifies fluid-section replacement, but crews must still follow Graco’s cleaning, lubrication, inspection, and service instructions.
About Spray Foam Systems
Spray Foam Systems is the #1 spray foam rig builder and spray foam equipment supplier in the United States. Family-owned and proudly serving the industry since 2007, we operate from a 7-acre campus with over 80,000 square feet of dedicated working space in Greensboro, GA. With over 10,000 customers served over the last 18 years, we specialize in delivering high-quality turnkey spray foam systems, distributing top-tier equipment and supplies, and providing nationwide service and training to help contractors grow and succeed in the spray foam insulation and roofing markets.