- Shop
Categories
Backed by industry-leading Graco equipment, Spray Foam Systems offers the ProPAK 200,300, 400, and Portable Cart series for spray foam insulation. The ProPAK 200 series includes the Graco Reactor 3 E-20 with a material output of 20 lbs a minute. The 200 series is ideal for any entry-level contractor. The Propak 300 series includes the Graco Reactor 3 E-30 with a material output of 30 lbs a minute. The 300 series is ideal for any entry level or mid-level contractor. The Graco Reactor 3 in the ProPAK 200 and 300 series is designed to communicate with the entire system to simplify the operator’s job, optimize spray parameters, and maximize productivity. The ProPAK 400 series includes the Graco Reactor 2 H-40 with a material output of 40 lbs a minute. The 400 series is ideal for any high-level contractor. Graco’s line of hydraulic Reactors brings increased yield and high-output spraying. The ProPAK Portable Cart series can be configured with your choice of a Graco Reactor and is operated by shore power. Shop Graco Spray foam rigs (link to Graco spray foam rig category)
Low-pressure spray foam machines utilize a revolutionary auto calibration and preheating hoses, the patent pending Nitrosys. The low pressure Nitrosys Spray Foam Rigs can be configured using either high pressure spray formulations or refillable spray foam formulation. The Equipment used in this rig is much safer and easy to use than high pressure spray foam rigs.Spray foam Systems manufacturers the low pressure spray foam insulation equipment and Nitrosys ProPAK mobile spray foam rigs for the spray foam, concrete lifting, polyuera and protective coatings industry. Our low-pressure spray foam machines are used throughout the industry in commercial and residential applications.We offer a full line of low-pressure spray foam insulation equipment to fit your spray application needs. Contact Spray Foam Systems today to learn more about our products and what we can do for you.
Backed by industry-leading equipment, Spray Foam Systems offers the ProPAK XD2, XD3, XD4, XP, and PC series for coating applications. The ProPAK XD2 includes the Graco Reactor 3 E-XP1 with a material output of 1 gallon per minute. The XD2 series is ideal for concrete lifting and entry-level polyurea applications. The ProPAK XD3 Series includes the Graco Reactor 3 E-XP2 with a material output of 2 gallons per minute. The Graco Reactor 3 in the XD2 and XD3 series is designed to communicate with the entire system to simplify the operator’s job, optimize spray parameters, and maximize productivity. The XD3 series is ideal for entry-level to mid-level polyurea applications. The ProPAK XD4 includes the Graco Reactor 2 H-XP3 with a material output of 2.8 gallons per minute. The XD4 series is ideal for high-volume coating applications. Graco’s hydraulic Reactor H-XP3 brings increased yield and high-output spraying.
The ProPAK XP includes the Graco XP-h sprayer with your choice of the XPh-50-h or the XP70-h series sprayer for epoxy applications . The XP50-h has a material output of 1.9 gallons per minute. The XP70-h has material output of 2.1 galloners per minute. The system’s hydraulic motor has been optimized and rated to match the pressure capabilities of the NXT 6500 air motor used on Graco XP50 and XP70 sprayers. GH Power Pack Accessory – The XP is now more versatile than ever for contractors wishing to take advantage of the convenience and efficiency of a gas-powered hydraulic system. Hydraulic systems are energy efficient and provide very smooth changeovers on the XP resulting in well balanced pressures and the smoothest possible spray pattern.
Spray Foam Systems Propak PC rigs include your choice of the Graco Mark V sprayer, the GH833 sprayer, or GH933 sprayer. The Graco Mark V sprayer delivers a higher flow rate to complete jobs faster. Providing 20% more productivity than the Mark IV HD, this unit comes with an upgraded Heavy-Duty Texture Gun that can accommodate a larger tip size to handle all texture finishes and the wide range of primers and paint. This unit has a material output of 1.35 GPM. The Graco GH 833 sprayer is the preferred choice for high production professional contractors who spray the wide range of materials. This jobsite-proven workhorse is the answer when you demand ruggedness, performance and value. This unit has a material output of 4 gallons per minute. The Graco GH933 provides maximum performance and unmatched versatility. Whether you need high pressure for long hose runs or hard-to-atomize materials, or high flow rates for heavier coverage, the GH 933 can get the job done. This unit has a material output out 2.5 gallons per minute.
Spray Foam Systems ProPAK Fiber Blowing Rigs are backed by the high-quality Krendl fiber blowing/cellulose machines. Krendl provides machines for the small, medium and large contractors. Krendl machines are available in electric, gas, and diesel with optional add-on accessories and equipment such as a Krendl gas removal vacuum. These rigs are designed with the fiberglass/cellulose insulation contractor in mind and can provide up to 70 cubic feet in hopper capacity. Choose from your choice of electric models 425,475,575, gas model 2800,or diesel 5200
All buildings and businesses have their own style in terms of layout and preference. With that being said, assuming that any spray foam trailer will work for the vast combination of jobs out there just isn’t professional. So, here at Spray Foam Systems, we offer custom spray foam rigs that we can tailor to your job’s exact specifications. Our trailers come in various sizes and can be loaded up with any variety of custom spray foam rigs you decide to go with for your job. No matter what industry you’re in, we want you to buy with confidence and know we will work with you to ensure you get the best tool you can when it comes to all things spray foam rigs.
Spray Foam Systems offers custom built rigs for spray foam insulation, protective coatings, and concrete lifting. Customize your rig outside based on your application and setup. Choose your choice of trailer, equipment, air compressor, power source and hose length. Fill out our custom rig builder form for a representative to contact you to discuss further and obtain pricing.
Spray Foam Systems PMC rigs are built for the plural component chemical industry. PMC designs a complete hydraulic product line of spray foam and plural component polyurethane systems with you in mind. Choose from rigs designed for spray foam, coatings and concrete lifting applications. Choose from low pressure proprotioners desied for spray foam contractors and high pressure proportoiners designed for coating and spray foam applications. Spray Foam Systems PMC Rigs include your choice of proportioners varying from material output of 20lbs a minute to 55 lbs a minute.
Spray Foam Systems Carlisle rigs are built for spray foam applications and include powerful IntelliSpray Carlisle proportioners, hoses and guns. The Carlisle equipment helps provide on ratio jobs and keep your rig up and running faster and more consistently. Choose from the IntelliSpray IS30 proportioner with material output of 30 lbs a minute, or the IntellliSpray IS40 proportioner with material output of 40lbs a minute.
Spray Foam System offers any of our ProPAK series rigs to be outfitted in a Box Truck. Box Trucks are supplied by the customer and outfitted with your choice of equipment from Graco, PMC, Carlisle or Krendl. Box truck rigs are built with a design to fit your equipment and eliminate hard to reach jobsites by utilizing a truck and trailer. Box truck rigs are ideal for any spray foam insulation, coatings, fiber/cellulose, or concrete lifting contractor
