A polyurethane spray rig gives contractors the equipment needed to apply spray foam efficiently, but trimming is often necessary after the foam cures. The right cutting saw or trimming tool helps remove excess foam and prepare sprayed areas for drywall or other finishing materials.
Choosing the right tool depends largely on the type of foam being sprayed, the required cutting reach, and how much trimming the crew typically performs.
Why Cutting and Trimming Tools Matter
Spray foam can expand beyond studs, joists, and other framing members during application. Once cured, excess material often needs to be trimmed flush with the framing.
Keeping appropriate cutting tools with a polyurethane spray rig can help crews:
- Remove excess cured foam efficiently
- Create clean, even surfaces
- Reach corners and confined areas
- Prepare sprayed areas for finishing
Having the appropriate tool available also helps crews move efficiently from application to trimming.
Spray Foam Saw Options for Your Polyurethane Spray Rig
Spray Foam Systems offers several cutting and trimming options for professional spray foam applications. Understanding how these tools differ can help contractors select equipment that fits the foam and type of trimming they regularly encounter.
Pneumatic Foam Saw
A pneumatic foam saw provides a powered option for trimming cured spray foam across larger areas. The SFS option is available with a 36-inch open-cell blade, providing additional reach for open-cell foam applications.
ProCUTTER Foam Cutting Saws
ProCUTTER saws are available in 20.5-inch and 27.5-inch sizes, with options designed for either open-cell or closed-cell foam. Contractors can select the cutting length and foam-specific configuration that best matches their typical applications.
SFS FoamZall FoamSaw
The SFS FoamZall provides another powered cutting option for crews that regularly trim cured foam. It is available with a 36-inch open-cell blade or a closed-cell blade, allowing contractors to choose the configuration that matches the material they spray.
SFS Hand Foam Trimming Saws
Hand trimming saws provide greater control for smaller areas, edges, corners, and locations where a larger powered saw may not be practical. SFS offers separate hand saw options for open-cell and closed-cell foam.
Super Shear Foam Removal Saw
The Super Shear is another option for removing cured spray foam. Configurations are available for open- or closed-cell applications, including an option equipped with an 18-inch closed-cell blade.
TurboCutz Foam Cutting Tool
TurboCutz provides contractors with a cutting option designed for both open- and closed-cell foam. This versatility can make it useful for crews whose polyurethane spray rig is used for different types of spray foam applications.
What to Consider When Choosing a Spray Foam Saw
The best cutting tool depends on the work your crew performs. Before adding a saw to a polyurethane spray rig, consider:
- Open-cell or closed-cell foam: Choose a saw and blade designed for the material being trimmed.
- Cutting reach: Longer blades can be useful when working across larger or deeper sprayed areas.
- Work area: Smaller tools can provide better maneuverability around corners, framing, and confined spaces.
- Amount of trimming: Crews performing extensive trimming may benefit from powered equipment, while hand tools can be useful for detail work.
- Replacement blades: Consider blade availability and the configurations required for your typical applications.
Matching the cutting setup to the foam and working conditions helps crews avoid relying on one tool for applications it was not designed to handle.
Keep Cutting Tools Ready for the Job
Inspect saws and blades before use, replace worn components when necessary, and keep commonly needed replacement blades available. Proper storage also helps protect cutting equipment while it is transported between jobsites.
Organizing these tools with the polyurethane spray rig ensures crews have the appropriate equipment available when trimming begins.
Build a More Complete Polyurethane Spray Rig
The right cutting and trimming tools help crews handle excess cured foam efficiently after application. Keeping these tools with a polyurethane spray rig ensures they are readily available when it is time to prepare sprayed areas for finishing.
Explore cutting saws and tools from Spray Foam Systems to keep your polyurethane spray rig equipped for the job.
FAQs
Do I need different cutting saws for open-cell and closed-cell spray foam?
Some cutting tools and blades are specifically designed for open-cell or closed-cell foam, while others can accommodate both. Always select the appropriate configuration for the material being trimmed.
How do I choose the right blade length for spray foam trimming?
Consider the depth of the foam, size of the area being trimmed, and required reach. Longer blades can help cover larger areas, while shorter tools may provide better control in confined spaces.
Should cutting and trimming tools be kept with the spray rig?
Yes. Keeping the appropriate saws, blades, and hand trimming tools with the rig helps crews stay prepared for trimming after spray foam application.
About Spray Foam Systems
Spray Foam Systems is the #1 spray foam rig builder and spray foam equipment supplier in the United States. Family-owned and proudly serving the industry since 2007, we operate from a 7-acre campus with over 80,000 square feet of dedicated working space in Greensboro, GA. With over 10,000 customers served over the last 18 years, we specialize in delivering high-quality turnkey spray foam systems, distributing top-tier equipment and supplies, and providing nationwide service and training to help contractors grow and succeed in the spray foam insulation and roofing markets.