
Reordering 3M 60923 cartridge/filters is easier when you know the part number, facepiece model, and quantity you need. Spray Foam Systems offers these replacement cartridge/filters, along with compatible facepieces and related accessories. A clear reorder list helps your crew restock before supplies run low.
Know What You Are Reordering
The 3M 60923 combines an organic vapor/acid gas cartridge with a P100 particulate filter. It helps protect against certain organic vapors, acid gases, and particles when used with an approved respirator assembly.
However, the P100 rating describes particle filtration. It does not mean the cartridge protects against every gas or vapor. Your employer’s hazard assessment and respiratory protection program must guide selection.
Before you reorder, check the number on your current cartridge. Also, confirm that the same cartridge remains approved for the work your crew performs.
Match 3M 60923 Cartridge/Filters to Your Facepiece
These cartridge/filters use a bayonet connection. They fit approved 3M facepieces, including the 6000 Series half and full facepieces, 6500 Series, 7500 Series, and FF-400 Series.
SFS lists 6000 Series half facepieces in small, medium, and large sizes. It also offers 6700, 6800, and 6900 full facepieces. When replacing a facepiece, use the make, model, style, and size specified by your respiratory protection program and fit test.
Plan Replacement Quantities Before You Order
First, count the workers who use the approved setup. Then, review your cartridge change schedule, current stock, and expected work. For a standard dual-cartridge facepiece, each replacement set requires two cartridge/filters.
SFS lists a standard 3M 60923 product option and a separate listing labeled “30 Pack.” Before checkout, confirm the number of individual cartridge/filters or pairs in the selected package.
- Record the manufacturer part number and SFS product listing.
- Confirm the package quantity and unit of sale.
- Count complete replacement sets rather than loose cartridges.
- Check delivery timing before stock reaches your reorder point.
How to Reorder from Spray Foam Systems
Visit the SFS website and search for 3M 60923. Open the matching product page, confirm the part number and package contents, then select your order quantity.
Next, add the item to your cart. Review any compatible facepieces or lens covers you also need, then check your cart before checkout. If the package quantity is unclear, contact SFS at 877-737-4362 before placing your order.
Add the Right Facepiece Accessories
While you check cartridge stock, inspect your facepieces and review accessory needs. SFS offers lens covers for 6000 Series full facepieces and separate covers for FF-400 Series models.
Match each cover to its listed facepiece. A lens cover helps protect the viewing surface, but it does not repair a damaged lens or restore a worn face seal.
Follow Your Cartridge Change Schedule
Your documented cartridge change schedule tells you when to replace cartridges in service. Plan stock around that schedule, and do not wait for an odor to decide that a cartridge needs replacement.
Also, 3M 60923 cartridge/filters do not supply breathing air. They cannot replace supplied-air protection where the task requires it. Follow the chemical manufacturer’s instructions, safety data sheets, and your workplace respiratory protection program.
Contact Spray Foam Systems to reorder 3M 60923 cartridge/filters and confirm package quantities, compatible facepieces, and related accessories.
FAQs
1. What does the 3M 60923 cartridge/filter do?
It combines organic vapor/acid gas protection with P100 particle filtration for certain hazards. Use it only in an approved assembly selected for your workplace exposures.
2. Can I use these cartridge/filters with any 3M respirator?
No. They fit specified 3M facepieces with bayonet connections. Confirm your exact model in 3M’s instructions before ordering or use. Compatibility also does not replace required fit testing.
3. How many replacement cartridge/filters should I order?
Count two cartridge/filters per replacement set for each standard dual-cartridge facepiece. Then, use your change schedule and stock needs to plan quantities. Confirm the package contents with SFS before checkout.
About Spray Foam Systems
Spray Foam Systems is the #1 spray foam rig builder and spray foam equipment supplier in the United States. Family-owned and proudly serving the industry since 2007, we operate from a 7-acre campus with over 80,000 square feet of dedicated working space in Greensboro, GA. With over 10,000 customers served over the last 18 years, we specialize in delivering high-quality turnkey spray foam systems, distributing top-tier equipment and supplies, and providing nationwide service and training to help contractors grow and succeed in the spray foam insulation and roofing markets.