Stoner E236 Urethane Mold Release – 12 oz Aerosol
Stoner E236 Urethane Mold Release is specially formulated as a release agent and anti-stick lubricant for molded urethanes and similar materials. It helps urethane parts release quickly and easily from mold surfaces while reducing defects caused by sticking.
E236 can provide multiple part releases per application and is suitable for numerous molding processes, including injection molding, compression molding, transfer molding, vacuum forming, pour casting, die casting, and extrusion molding. The colorless, non-staining formula contains no chlorinated solvents such as methylene chloride or 1,1,1-trichloroethane.
Features and Benefits
- Designed for molded urethanes and similar materials
- Provides fast and easy part removal from molds
- May provide multiple releases per application
- Helps improve part appearance
- Reduces defects caused by sticking
- Colorless and non-staining
- Economical—a light coating produces the best results
- 12 oz aerosol can
Recommended Applications
- Cast elastomer molding
- Injection molding
- Compression and transfer molding
- Pour casting
- Vacuum forming
- Die casting
- Extrusion molding
Directions for Use
- Make sure the mold surface is clean and dry.
- Shake the aerosol can well before use.
- Hold the can approximately 10 to 12 inches from the mold surface.
- Apply a thin, even mist to the mold surface.
- Reapply as necessary based on the molding material and process.
Frequently Asked Questions
What is Stoner E236 used for?
E236 is used to prevent molded urethane parts and similar materials from sticking to mold surfaces.
Is E236 intended for spray-foam overspray protection?
No. E236 is primarily a mold-release agent for molded urethane parts. Stoner E238 is the product intended to protect equipment and surrounding surfaces from polyurethane spray-foam overspray.
Can one application release multiple parts?
Yes. Depending on the material, mold, and molding conditions, E236 may provide multiple part releases per application.
Will E236 stain the finished part?
Stoner describes E236 as colorless and non-staining when applied properly.
How much E236 should be applied?
Apply a thin mist from approximately 10 to 12 inches away. A light, uniform coating produces the best results.
Package size: 12 oz aerosol can
Manufacturer part number: E236
Spray Foam Systems SKU: 240200
Always review the current manufacturer Safety Data Sheet and Product Data Sheet before use. Use with adequate ventilation and follow all handling, storage, and personal-protection requirements.
