Nitrosys Plus/Geo Air Distribution Assembly
This assembly is for carts, OEM setups, and stand-alone systems that are set up within 10′ of the distribution block.
Assembly includes a regulator/dryer, 7-port distribution block, and air lines with quick connects to supply air to all parts of your Nitrosys Plus/Geo System. Assembly (regulator/dist. block) must be mounted within 5 feet of cabinet, 9 feet of pumps.
Only 5 ports of the block are utilized in this configuration. Before adding any new lines to the other available ports – verify your air supply system can sufficiently supply the amount of air required for everything to run properly.
1 – 3/8″ Input Line from Regulator. Connects supply air from the regulator/dryer to the distribution block.
1 – 1/4″ Output Line to Nitrosys Cabinet (6′). Will connect to the cabinet air supply on the lower, right hand side of the Nitrosys cabinet.
1 – 1/4″ Output Line to GreenFlare Heated Hose (6′). Will connect to the gun air line in the hose, located at the end of the hose that connects to the cabinet.
1 – 1/4″ Output Line to “A” Pump (10′). Will connect to fluid pump.
1 – 1/4″ Output Line to “B” Pump (10′). Will connect to fluid pump.
This assembly is NOT long enough for Rigs, or any other configuration, that requires air lines to be longer than 10′. Please contact our customer service department for any custom length request at: 877-737-4362
Manufacturer Part Number: 236436