The Electric Mixer w/Folding Props, Assembly is an industrial-grade mixing solution engineered to handle high-viscosity materials with ease. It features a robust Eibenstock EHR 23/1.4 R motor, custom-adapted to securely connect with the IPM shaft mixer paddles, providing superior mixing performance for spray foam insulation and other applications.
Key Features & Benefits:
- High-Power Motor: 14.5 Amp, 110V AC motor capable of mixing up to 200 lbs. of high-viscosity materials.
- Custom Coupling Adapter: Ensures a secure connection to the IPM shaft mixer paddles (SKU: 700095).
- Versatile Mixing: Compatible with additional paddles such as MG 160, WG 160, and TWP 160 (sold separately, must remove custom coupler to attach OEM paddles).
- Collapsible Mixing Blades: Self-expanding blades for easy insertion into standard 55-gallon drums.
- Stainless Steel Construction: Corrosion-resistant materials for durability and long-term use.
- Efficient Mixing System: Three-blade design for thorough blending of high-viscosity fluids, ensuring uniform consistency.
- Multi-Purpose Use: Suitable for mixing polyurethane, coatings, mold releases, varnishes, lubricants, and more.
Additionally, the coupler on this mixer can be removed to allow for direct attachment of the MG 160 mixing paddle (SKU: 310721). The MG 160 is designed for high-viscosity materials, including finished mortar, finished plaster, floor compounds, refractory cements, insulating materials, and quartz-filled epoxy resin. By removing the set screws and detaching the adapter, the MG 160 paddle can be securely screwed into the motor, making this mixer highly versatile for a wide range of heavy-duty applications.
Specifications
| Feature | Specification |
|---|---|
| Motor Model | Eibenstock EHR 23/1.4 R |
| Power | 14.5 Amp / 110V AC |
| Capacity | Up to 200 lbs. of high-viscosity material |
| Free Speed | 150-325 RPM |
| Load Speed | 100-275 RPM |
| Weight | 20 lbs. |
| Paddle Compatibility | MG 160, WG 160, TWP 160 (sold separately) |
| Mixing Stand Compatibility | RST 92 & 25GP-WD |
Disassembly & Adjustment Instructions
This electric mixer is fully assembled and ready for immediate use. However, if adjustments or part replacements are needed, follow these instructions:
- Removing the Coupler:
- Locate the set screws securing the coupler to the motor shaft.
- Use an Allen wrench to loosen and remove the set screws.
- Slide the coupler off the shaft carefully.
- Reassembling the Mixer with the Original Coupler:
- If switching back to the original setup, slide the coupler back onto the motor shaft.
- Tighten the set screws to secure the coupler in place.
- Attach the IPM shaft mixer paddles as needed.
- General Maintenance:
- Regularly inspect the set screws and coupler for any signs of wear.
- Clean the blades and shaft after each use to prevent material buildup.
- Store in a dry, clean environment to prolong lifespan.
- If Attaching the #310721 MG 160 Paddle (not for Spray Foam Applications):
- Align the MG 160 paddle shaft with the motor.
- Securely screw the paddle into the motor shaft, ensuring a tight fit.
- Double-check that the paddle is firmly attached before operation.
