DC315 Intumescent Coating Ignition Barrier
Your one step solution for Polyurethane Foam “Ignition Barrier” ratings.
DC315 is a Certified Warnock Hersey listed and rated product which has passed certified testing for the NFPA 286 (AC-377 standards) as an Ignition Barrier.
DC315 applies as easily as regular latex paint and being a water base cleans up in a snap. Using DC315 will satisfy code compliance on “Ignition Barriers” on your next foam job means:
Large single coat spread rate:
- NFPA 286 (AC377) Attic Crawl Space Ignition Barrier (130 sq. ft./gal @ 12 mils wet 8 mils dry) coverage rate of .77 gallons (2.9 L) per 100 square feet (9.3 m2)
Benefits:
- Reduced labor cost, reduced material cost and higher profits
- Fast turnaround time
- Easily applied with a sprayer, brush or roller
- No complicated mixing- just stir the paint before application
- No waste
- Fast and easy clean up of our water based latex product, tools & equipment
- Will not gum up or block spray equipment
- Passed strict EPA – VOC and AMQD tests
- No formaldehyde
- Non Toxic, Low Vapors, Low VOCs less than 50 making DC-315 a Green Product
- Earn 2 LEED points for using DC-315
- Two year shelf life
- Certified Code Compliant Coating
Manufacturer Part Number: DC315-5 Ice Gray
