IPM DM-101 Drum Mixer
This IPM DM 101 Air powered agitator is for mixing - as required by some chemical manufacturers. The DM - 101 Drum Mixer is a very effective tool in mixing 55 gallon drums. Complete mixing can be achieved in short periods of time, usually within 30 minutes. The unique design of the blade allows the mixing blade to pass through the 2" NPT opening in the drum. With two 6" and one 8" blade, optimum mixing is achieved throughout the drum. Learn More
Graco Two Supply Pumps with Fluid Plumbing (Husky 1050 246368) 246676
10 ft x 3/4 in (3 m x 19 mm) Supply Hose,
6 ft x 3/4 in (1.8 m x 19 mm) Suction Hose
Graco 246676 Learn More
IPM Transfer Pumps deliver with reliability in their design and diversity in their capabilities
The IP-02 is designed specifically for difficult to handle materials. The immersed lower pump, tie-tubes, and sealing bung bushing allow quick drum change without exposing the system to contamination or moisture.
Two Different types of pumps:
Carbon Steel
Stainless Steel
Learn More
IPM IP02 Fluid Repair kit. Repairs the lower half of your pump. Comes with a Complete Kit of seals and O rings for the lower fluid section of the pump
IPM 601013. Learn More
Graco T1 Transfer Pump 256200
Ratio 2:1
Maximum Output - Continuous 2.5 gpm (9.5 lpm)
Maximum Output - Intermittent 4.0 gpm (15 lpm)
Maximum Input Air Pressure 180 psi (25 bar, 2.5 MPa)
Maximum Ambient Temperature 120° (50°C)
Maximum Fluid Temperature 190°F (88°C)
Weight 18 lbs (8.4 kg)
Dimensions 51.5 in (130.8 cm)
Manual Number 312766
Graco 256200 Learn More
