Handi-Foam 250 Sound Barrier Spray Foam Kit P10697 Handi-Foam Sound Barrier is an open cell formulation designed for sound deadening and used to fill and insulate large voids and surfaces in interior walls, office walls, common walls, media rooms, play rooms and server rooms.
Handi-Foam Sound Barrier is dispensed using the patented Handi-Gun Dispensing Unit for accurate and precise applications. Handi-Foam Sound Barrier is available in a variety of disposable sizes. Kit Contains 250 Square Feet at 1" Thick Technical Data Sheet Handi-Foam Sound Barrier is excellent for sound deadening and reducing noise levels, helping to provide a more comfortable environment.
Handi-Foam Sound Barrier achives a Sound Transmission Coeffiecent (STC) of 35 at three inches thick. Handi-Foam Sound Barrier high expansion properties easily fills voids. In addition, Sound Barrier's quick cure time, reduces labor time and costs.
- ItemSpray Foam Sealant
- Number of Components2
- Size26.4 lb.
- Container TypeAerosol Can
- Insulation ValueR-3.7
- Expansion Ratio8:1
- Coverage20.8 cu. ft., 250 Board ft.
- Application Time30 to 60 sec.
- Full Cure1 hr.
- Application Temp. Range40 Degrees to 100 Degrees F
- Performance Temp. Range-200 Degrees to 240 Degrees F
- Flash Point240 Degrees F
- Specific Gravity1.2
- SubstratesAll Except Polyethylene, Polypropylene, Silicone, Oils, Greases, Mold Release Agents And Similar Materials
- ApplicationSound-Deadening Assemblies
- StandardsASTM E-84 Class 2 Fire Rated, UL-94 Rated
- IncludesGun And Hose Assembly And Initial 8-pk Of Nozzles
Temperature: Spray foam products are temperature sensitive. You can spray this kit in colder outdoor temperatures, the key is to keep the core temperature of the tanks within the proper range of 75-85°F.
Shake Well: Prior to using this kit, the canisters must be shaken well. One way to achieve this with the larger kits is to remove the tank from the box and roll it back and forth on the ground with your foot for at least 2 minutes.
Change Nozzles: It is important to change the nozzle after you stop spraying for more then 30 seconds. Failure to change nozzles may result in damage to the spray gun.
Reuse Nozzles: It is possible to clean and reuse a nozzle 2-3 times. As soon as you are done spraying, remove the nozzle and drop it in a can of acetone. You can also use our Handi-Cleaner to clean out uncured foam.
Safety Considerations: Our Safety Kit includes a tyvek suit with hood, respirator, goggles, and 2 pairs of gloves.
Clean Up: You can clean up uncured foam with Handi-Cleaner. Once foam is fully cured, you will have to remove it by mechanical means.
You may also be interested in the following product(s)