Call us at
or click here for customer support form.
Enhanced worker safety, environmentally friendly, non-hazardous, non-flammable, non-HAPs, non-Chlorinated, non-Aerosol, BIODEGRADABLE, Low emission, Safe, Fast and Residue-Free, Flushing & Immersion Solvent-Based Cleaner designed to remove Flexible and Rigid TWO COMPONENT Polyurethane Foam Adhesives and Urethanes. Direct replacement for Methylene Chloride, acetone, MEK, acetates, etc.
Polyurethane is a polymer composed of a chain of organic units joined by Carbomate (Urethane) Links, most commonly formed by reacting a di- or polyisocyanate with a polyol.
“Working together to put employee safety and the environment first”
Global Specialty Products-USA, Inc. (Mount Holly, NJ) hereby certifies that SURF X Flush™ – 2000 (part A & B) is manufactured by Global Specialty Products-USA, Inc. to specifications in which it does not contain any substances that are listed on the:
DOES NOT CONTAIN any of the following ingredients or family of the ingredients:
USE FULL STRENGTH AT ROOM TEMPERATURE (to avoid volatility, loss of product and moisture contamination (the product is hygroscopic)).
Flushing: use full strength at room temperature, mild heat will enhance the cleaning performance.
Immersion Cleaning: submerge parts to be cleaned. Let them soak until residue is loosened and can be wiped. Then rinse parts with water and dry.
Mild heating (130 °F) of SURF X FLUSH 2000™ as well as, the use of ultrasonic immersion tank will enhances the cleaning performance. Mechanical filtering of larger urethane particles using a cheesecloth or metal mesh filter will help extend the life of the solvent. For more difficult cleaning applications, use CIRR D-Bond™ in immersion cleaning tank.
USE NATURAL RUBBER GLOVES WHEN HANDLING THIS PRODUCT – DO NOT add water or USE WATER to rinse off tools or parts the cleaning performance will be compromised – DO NOT ATOMIZE this product
RECOMMENDED MATERIALS & MATERIALS TO AVOID
To Use for; O-Rings, Gaskets, Hoses & Pump Packaging:
Teflon, Butyl Rubber, Buna-S, Ethylene-Propylene Copolymer, Kalrez, Fluorosilicone Rubber, Mild Steel, Halar, Melamine, Nylon 101, Ryton.
Materials to Avoid:
Viton, PVC, ABS, Buna-N, Durel, Hypalon, Kynar, Lexan, Lucite, Noryl EN-265, Noryl 731, PET, Phenolic, Polyester, Polysulfone, Polyurethane, Ultem, Valox.
1, 5 and 55 gallon UN-Rated Packaging and Go GREEN™ Saturated Wipes (75 wipes/Re-Usable Canister).
RECOMMENDED PARAMATERS TO RECLAIM / RECYCLE
SURF X Flush™ – 2000 (part A & B) recyclable via VACUUM Distillation at 300 Degrees F and 27 mm HG pressure. Most key solvents will boil off; however the wetting agents, surfactant and corrosion inhibitors will remain in the distilled bottom. Please add VIRGINSURF X Flush™ – 2000 (part A & B) to the recycled “Distillate Portion” to maintain steady cleaning performance.
Proper Disposal of Waste “Spent Product” or Distilled Bottom (if recycled): Solutions containing hazardous or non-hazardous soils should be handled and treated according to Federal, State and Local Environmental Laws. Even though SURF X Flush™ – 2000(part A & B) is mostly biodegradable, the spent material should not be disposed of in any sewerage system. The used material can be recycled via vacuum distillation on-site or by a mobile reclamation service company. Discharge your distill bottom and screened out solids according to Federal, State and Local Regulations. PLEASE REVIEW THE SDS CAREFULLY BEFORE USING OR HANDLING WASTE